All Products Power Switch

BSP752RXUMA2 / Smart High-Side Power Switch, Overload protection, Current limitation, Short circuit protection, Thermal shutdown with restart, Overvoltage protection (including load dump), Fast demagnetization of inductive loads, Reverse battery protection with external resistor, Open drain diagnostic output for overtemperature and short circuit, Open load detection in OFF-State with external resistor, CMOS compatible input, Loss of GND and loss of Vbb protection, ESD - Protection, Very low standby current, AEC Qualified, Green Product (RoHS compliant)
BSP752RXUMA2

Description: Smart High-Side Power Switch, Overload protection, Current limitation, Short circuit prote ...
Package: T&R | MOQ: 2500 | MPQ: 2500

TPS22975DSGR / The TPS22975DSGR is a compact high-current load switch from Texas Instruments, packaged in an 8‑pin WSON (DSG) package with an exposed thermal pad. It integrates a single N‑channel MOSFET capable of handling up to 6 A continuous current, with a remarkably low on‑resistance of just 16 mΩ over a wide input range (0.6–5.7 V VIN, 2.5–5.7 V VBIAS). The device supports low-voltage logic control (1.2–3.3–5 V), offers configurable slew-rate to manage inrush current, optional quick-output discharge, and includes thermal shutdown and robust ESD protection (2 kV HBM, 1 kV CDM). With ultralow quiescent current (~37 µA) and wide temperature tolerance (–40 °C to +105 °C), it is ideal for efficient power-path management in space-constrained, high-performance systems.
TPS22975DSGR

Description: The TPS22975DSGR is a compact high-current load switch from Texas Instruments, packaged in ...
Package: T&R | MOQ: 3000 | MPQ: 3000

TPS2121RUXR / ​The TPS2121RUXR is a dual-input, single-output (DISO) power multiplexer designed to seamlessly transition between two power sources, ensuring uninterrupted power to the load. It operates over a wide input voltage range of 2.7 V to 22 V, with an absolute maximum input voltage of 24 V. The device features a low typical on-resistance (R_ON) of 56 mΩ, facilitating efficient power delivery. It supports an adjustable output current limit ranging from 1 A to 4.5 A, configurable via an external resistor. The TPS2121RUXR offers a fast switchover time of approximately 5 µs, minimizing voltage drop during source transitions. Additional features include adjustable overvoltage protection, priority input selection, channel status indication, and adjustable soft-start times. The device is housed in a 12-pin VQFN-HR package and operates within a temperature range of -40°C to 125°C, making it suitable for various applications requiring reliable power management. ​
TPS2121RUXR

Description: ​The TPS2121RUXR is a dual-input, single-output (DISO) power multiplexer designed to sea ...
Package: T&R | MOQ: 3000 | MPQ: 3000

TPL5110QDDCRQ1 / ​The TPL5110QDDCRQ1 is an automotive-grade, nano-power system timer with an integrated MOSFET driver, designed for power-gating applications. It operates within a supply voltage range of 1.8V to 5.5V and consumes a typical current of 35 nA at 2.5V, making it highly energy-efficient. The device offers selectable timing intervals from 100 milliseconds to 7200 seconds, with a typical timer accuracy of 1%. It features a resistor-selectable time interval, manual MOSFET power-on capability, and a unique one-shot function where the timer powers the MOSFET for a single cycle. Qualified for automotive applications, the TPL5110QDDCRQ1 meets AEC-Q100 standards, operating over a temperature range of -40°C to 125°C. It is available in a compact 6-pin SOT-23 package. ​
TPL5110QDDCRQ1

Description: ​The TPL5110QDDCRQ1 is an automotive-grade, nano-power system timer with an integrated M ...
Package: T&R | MOQ: 3000 | MPQ: 3000

DRV5032FBDBZR / ​The DRV5032FBDBZR is an ultra-low-power digital-switch Hall effect sensor from Texas Instruments, designed for compact and battery-sensitive applications. Operating within a supply voltage range of 1.65 V to 5.5 V, it features a typical power consumption of 0.54 µA at a 5-Hz sampling rate. This omnipolar sensor responds to both north and south magnetic fields, with an operate point (BOP) of ±4.8 mT and a release point (BRP) of ±3 mT, resulting in a hysteresis (BHYS) of 1.5 mT. The device provides a push-pull output configuration and is housed in a 3-pin SOT-23 package. With an operating temperature range from –40°C to +85°C, the DRV5032FBDBZR is suitable for various applications, including battery-critical position sensing, portable electronics, and contactless activation systems. ​
DRV5032FBDBZR

Description: ​The DRV5032FBDBZR is an ultra-low-power digital-switch Hall effect sensor from Texas In ...
Package: T&R | MOQ: 3000 | MPQ: 3000

MMPF0100F0AEP / The MMPF0100F0AEP is a high-performance Power Management IC (PMIC) from NXP Semiconductors, designed to efficiently regulate power in embedded systems, particularly for i.MX 6 processors and similar applications. It features multiple high-efficiency buck regulators, a boost regulator, and six linear regulators (LDOs), making it ideal for complex power architectures. The device supports dynamic voltage scaling (DVS), allowing power optimization based on system demand, and includes programmable power-up sequencing, standby modes, and OTP memory configuration. With a switching frequency of up to 4 MHz, it ensures minimal noise and efficient operation. Built-in protection features such as thermal shutdown, current limiting, and short-circuit protection enhance system reliability. Operating within a 2.8 V to 4.5 V input range, the PMIC is well-suited for industrial control, medical devices, smart home applications, and portable electronics. Its compact 56-pin HVQFN package (8 mm × 8 mm) ensures a small footprint while providing extensive power management capabilities.
MMPF0100F0AEP

Description: The MMPF0100F0AEP is a high-performance Power Management IC (PMIC) from NXP Semiconductors ...
Package: TRAY | MOQ: 520 | MPQ: 260

ADM6713SAKSZ-REEL7 / The ADM6713SAKSZ-REEL7 is a voltage supervisor IC designed for monitoring power supply voltages and providing reset signals to ensure reliable operation of microprocessor-based systems. It features a manual reset input for external reset initiation, and it asserts reset when VCC drops below 2.89 V, deasserting it when VCC exceeds 2.96 V. With a typical supply current of just 35 µA, it is highly power-efficient. The device operates over an extended temperature range of -40°C to +125°C, making it suitable for automotive and industrial applications. Housed in a 4-lead SC70 package, it is ideal for compact designs. The -REEL7 suffix indicates the part is provided on a 7-inch reel for automated assembly.
ADM6713SAKSZ-REEL7

Description: The ADM6713SAKSZ-REEL7 is a voltage supervisor IC designed for monitoring power supply vol ...
Package: T&R | MOQ: 3000 | MPQ: 3000

ADM1293-1AACPZ / The ADM1293-1AACPZ is a high-precision, high-side digital current, voltage, and power monitor from Analog Devices. It is designed for monitoring power consumption in systems that require accurate current sensing and power management. The device features a 16-bit ADC for current, voltage, and power measurements, ensuring high-precision monitoring. It can measure voltage, current, and power in a wide range of systems and is ideal for applications such as power supply monitoring, data centers, servers, and telecommunications equipment. With a common-mode voltage range from 0 V to 20 V, it supports high-side current sensing, and it is capable of bidirectional current sensing.
ADM1293-1AACPZ

Description: The ADM1293-1AACPZ is a high-precision, high-side digital current, voltage, and power moni ...
Package: TRAY | MOQ: 528 | MPQ: 66

ADG721BRMZ-REEL7 / The ADG721BRMZ-REEL7 is a dual SPST (Single-Pole Single-Throw) analog switch from Analog Devices, designed for low-voltage, high-speed switching applications. It features a low on-resistance of 4Ω (max) and excellent channel-to-channel matching of 300mΩ (max). The switch operates with a supply voltage range of 1.8V to 5.5V and offers fast switching times with a turn-on time of 14ns (max) and a turn-off time of 6ns (max). With a -3dB bandwidth of 200MHz and low charge injection (2pC), it ensures minimal distortion and high-speed signal routing. The ADG721BRMZ-REEL7 is ideal for use in communication systems, audio/video switching, test equipment, and portable devices, with a temperature range of -40°C to +85°C.
ADG721BRMZ-REEL7

Description: The ADG721BRMZ-REEL7 is a dual SPST (Single-Pole Single-Throw) analog switch from Analog D ...
Package: T&R | MOQ: 1000 | MPQ: 1000

TPS3803-01DCKR / Supervisor Open Drain or Open Collector 1 Channel SC-70-5
TPS3803-01DCKR

Description: Supervisor Open Drain or Open Collector 1 Channel SC-70-5 ...
Package: T&R | MOQ: 3000 | MPQ: 3000

STMPS2141STR / Power Switch/Driver 1:1 N-Channel 500mA SOT-23-5, The STMPS2141STR is a high-side power distribution switch from STMicroelectronics, designed for applications requiring robust power management.
STMPS2141STR

Description: Power Switch/Driver 1:1 N-Channel 500mA SOT-23-5, The STMPS2141STR is a high-side power di ...
Package: T&R | MOQ: 3000 | MPQ: 3000

NCV8460ADR2G / Power Switch/Driver 1:1 N-Channel 6A 8-SOIC
NCV8460ADR2G

Description: Power Switch/Driver 1:1 N-Channel 6A 8-SOIC ...
Package: T&R | MOQ: 2500 | MPQ: 2500

ITS4140NHUMA1 / Power Switch/Driver 1:1 N-Channel 200mA PG-SOT223-4, 4.9V ~ 60V, On/Off, N-Channel, 200mA, 1Ohm RDSon
ITS4140NHUMA1

Description: Power Switch/Driver 1:1 N-Channel 200mA PG-SOT223-4, 4.9V ~ 60V, On/Off, N-Channel, 200mA, ...
Package: T&R | MOQ: 4000 | MPQ: 4000













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |